CERTIFIED PERFORMANCE AT 200M https://www.mares.com/en-IC/sports/diving/ansti-machine/ 1ST STAGE PVD COATING SWIVEL TURRET NATURAL DFC ON ALL…
Rebreather SCR Mares Horizon DYKNING# REGULATORS# SCR# HORIZON#
https://www.youtube.com/watch?v=takahsfnJyY
https://www.youtube.com/watch?v=jwvnPc80BJk
DESCRIPTION
DIMENSIONS AND WEIGHT
Height: 54 cm
Width: 40 cm
Depth: 22 cm
Unit weight: 12 kg (without regulator set)
Complete non-deco version weight: 13.4 kg
Complete full deco version weight: 14.8 kg
FEATURES
Two (2) scrubber canisters, each containing 1 kg of CO2 absorbent that can be refilled by user
Two (2) integrated weight pockets, each containing a maximum of 2.5 kg of weight
Fully adjustable harness system, from XS to XXL
Safety gag strap on mouthpiece
2 oxygen sensors
Constant oxygen fraction supplied to the diver, adjustable during diving
Reverts automatically to full nitrox breathing in case of failure
Remaining scrubber time calculated by the dive computer
No tools required for preparation, use, cleaning
LIMITS OF USE
Maximum recommended depth using one stage cylinder as gas supply, no decompression: 30 m
Maximum allowed depth using two stage cylinders as gas supply: 40 m
ppO2 during use: minimum 0.22 bar, maximum 1.60 bar
Water temperature: minimum 4°C, maximum 34°C
Allowed nitrox mix: minimum 30%, maximum 99%
Approved scrubber material: Sofnolime 797
Scrubber material endurance depending on temperature and metabolic oxygen consumption: calculated by the dive computer (i.e. at 15°C or higher, with medium/high oxygen consumption, duration is > 3 h)
MAXIMUM WORK RATE CONDITIONS
75 RMV at 40 m, CO2 production of 3 l/min for 5 min
ELECTRONICS
Three sets of redundant electronics, each with an individual battery system
All battery systems can be charged from one single point
2.8” full color, high contrast dive computer screen
User adaptable gradient factor decompression algorithm
HUD with clear GOOD / FAIL indication
Approved to 40m